BLUETTI Hub D1 DC Power Hub
The BLUETTI Hub D1 is designed for BLUETTI users who want a cleaner, more capable energy system without relying on improvised wiring or low-power adapters. A dedicated DC power hub for expanding low-voltage output options from a compatible BLUETTI Apex 300 setup. For Australian touring, home-backup and off-grid installations, choosing the correct accessory matters because cable type, DC voltage, charging limits and compatible system family can determine whether the overall setup works as intended.
700W multi-port DC distribution for Apex 300. The BLUETTI Hub D1 should be selected around the exact BLUETTI system being used, not simply by matching the product name. Before installation, confirm the connected power station, cable package, input/output limits and any required accessories.
Why choose BLUETTI Hub D1?
- Applicable model listed by BLUETTI Australia: Apex 300.
- Up to 700W total DC output.
- Nine output ports for simultaneous DC and USB loads.
- Includes a 50A Anderson output for higher-current DC equipment.
- Dual 100W USB-C ports for compatible USB-C devices.
- Dual cigarette-lighter, dual DC5521 and dual USB-A outputs.
The value of the BLUETTI Hub D1 is not just the headline power figure. A well-designed BLUETTI accessory helps the wider system operate in a more predictable way: charging sources are connected through the intended interfaces, DC loads have the correct output path, and monitoring or protection features can work as the manufacturer designed them to. That becomes especially important in vehicles, caravans, workshops and backup-power systems where equipment may stay connected for long periods.
How BLUETTI Hub D1 fits into a BLUETTI system
Start with the energy system you already own or plan to install. Identify the exact BLUETTI power station or battery platform, then check the official compatibility information and the connector required for this accessory. Where a product supports several systems, the same physical accessory may still require a different connection cable or configuration. PR Solar therefore recommends treating the cable and connection method as part of the product selection rather than an afterthought.
In a mobile installation, also think about where the accessory will be mounted, how cables will be routed, ventilation, protection from water and physical damage, and whether the system can be inspected or disconnected for service. The BLUETTI Hub D1 should be installed so that connectors are not under strain and cables are protected from sharp edges, excessive heat and moving vehicle components.
Installation and operating considerations
Follow the BLUETTI manual supplied for the exact model. Electrical accessories can carry substantial current even when the nominal voltage is relatively low, so conductor size, fuse protection, connector quality and secure terminations matter. Where the installation involves a vehicle starter battery, high-voltage PV array, permanent DC distribution or multiple power stations, use installation practices appropriate to the electrical system and seek qualified assistance when required.
Before first use, check that every plug is fully seated, polarity is correct, the accessory has adequate airflow, and the connected source and load remain within their specified limits. After commissioning, monitor the system during the first charging or load cycle. The BLUETTI Hub D1 should not be operated with damaged cables, loose terminals or a configuration outside the manufacturer’s published limits.
Key specifications
| Maximum total DC output | 700W |
|---|---|
| Cigarette-lighter ports | 2 |
| USB-C ports | 2 × 100W USB-C PD |
| USB-A ports | 2 × 5V/3A |
| DC5521 ports | 2 |
| Anderson output | 1 × 50A |
| Approx. weight | 1.7kg |
| Approx. dimensions | 250 × 160 × 73mm |
| PR Solar category | BLUETTI > Main Accessories |
| Brand | BLUETTI |
Choosing the right BLUETTI accessory
When two BLUETTI accessories appear to perform a similar job, compare the system role rather than only the price. A charging accessory manages energy going into a power station; a DC hub distributes power to loads; a parallel box combines supported power units; and a solar charge controller manages energy from a PV array. Selecting the right device keeps the installation simpler and reduces the need for adapters or workarounds.
The BLUETTI Hub D1 is best treated as one part of a complete system. Confirm the source, destination, cable type, maximum power and expected operating environment together. This also makes later expansion easier because the original installation documents which accessories and connection standards are already in use.
Frequently asked questions about BLUETTI Hub D1
What is Hub D1 designed for?
BLUETTI Australia lists Hub D1 as an accessory for Apex 300, adding a broad set of DC and USB outputs.
How much total DC output can Hub D1 provide?
BLUETTI lists a maximum total output of 700W for the Hub D1.
Which ports are available?
The product listing identifies two cigarette-lighter ports, two 100W USB-C ports, two USB-A ports, two DC5521 ports and one 50A Anderson output.
Manufacturer information and PR Solar support
For the latest manufacturer information, compatibility notes, installation guidance and product documentation, refer to the
official BLUETTI Australia product page.
For help selecting a compatible BLUETTI accessory or planning a complete power system, visit
PR Solar.
Specifications and compatibility details are based on current BLUETTI source material. Always confirm the final cable, connector and system configuration before installation.
