BLUETTI AC2P Portable Power Station – 300W 230.4Wh
The BLUETTI AC2P Portable Power Station is a compact LiFePO₄ power station for camping, touring, day trips, emergency backup, mobile work and everyday portable power. It combines a 230.4Wh battery with 300W continuous AC output in a lightweight 3.6kg enclosure, making it a practical option when you need more capability than a power bank without moving to a much larger power station.
With up to 270W AC input, up to 200W solar input, a 100W USB-C port, Bluetooth app control and 600W Power Lifting capability for supported resistive loads, the AC2P is designed around fast charging and easy transport.
Why choose BLUETTI AC2P?
- 230.4Wh LiFePO₄ battery: suitable for phones, tablets, laptops, lighting, communications equipment and other compatible portable loads.
- 300W continuous AC output: mains-style power for devices that stay within the inverter’s published output limit.
- 600W Power Lifting capability: supports selected resistive appliances where BLUETTI’s Power Lifting mode is appropriate.
- 2,500+ battery cycles: BLUETTI specifies more than 2,500 cycles to 80% of original capacity.
- 270W maximum AC input: designed for rapid recovery from mains power.
- 200W maximum solar input: practical off-grid recharging with a compatible solar panel configuration.
- 100W USB-C output: useful for compatible laptops, tablets, phones and other USB-C devices.
- BLUETTI App via Bluetooth: supported monitoring and control from a mobile device.
- Approx. 3.6kg: compact enough for frequent transport between home, vehicle, campsite or work area.
BLUETTI AC2P power and capacity
Battery capacity and inverter output describe different parts of a power station. The 230.4Wh capacity indicates how much energy the battery stores, while the 300W AC rating indicates how much continuous AC power the inverter can supply at one time. Both figures matter when deciding whether the BLUETTI AC2P suits a particular use case.
For lower-power electronics, the AC2P can provide a useful portable energy reserve without the size and weight of a large backup battery. Runtime depends on the actual device load, conversion losses, battery state, temperature and whether power is drawn through AC, USB or DC outputs. A 50W device will generally run much longer than a 250W appliance from the same 230.4Wh battery.
High-power appliances need to be checked against the 300W continuous output limit before use. Power Lifting mode can provide additional capability for certain resistive loads up to the model’s published 600W lifting figure, but it should not be treated as a 600W continuous inverter rating for every appliance. Equipment with motors, compressors or high startup surges should be assessed against the manufacturer’s operating requirements.
Fast AC, solar and vehicle charging
The BLUETTI AC2P Portable Power Station supports several charging methods, making it useful both at home and away from mains power.
AC charging: The published maximum AC input is 270W. BLUETTI lists approximately 70 minutes for a full charge under its fast AC charging conditions. Actual charging performance varies with battery temperature, state of charge and operating settings.
Solar charging: The AC2P accepts up to 200W solar input at 12–28V DC and 8.2A. A compatible solar panel can make the unit substantially more useful for camping and off-grid trips, but the panel configuration must remain inside the power station’s permitted voltage and current range. Check panel open-circuit voltage as well as nominal wattage before connection.
Vehicle charging: The unit can also charge from a compatible 12V or 24V cigarette-lighter source. Vehicle charging is useful while travelling, although available charge rate depends on the source and cable configuration.
Outputs, app control and everyday use
The AC2P provides a practical mix of AC, USB and DC connections for a compact power station. The Australian model includes one 230V AC outlet with 300W total AC output, one USB-C port rated up to 100W, two USB-A ports rated at 12W each, and one regulated 12V/10A car outlet.
The inverter produces pure sine wave AC output, which is appropriate for many common electronics. The unit also supports pass-through charging, allowing power to be supplied while the battery is being charged, subject to the manufacturer’s operating limits.
BLUETTI App connectivity is provided over Bluetooth. Depending on current firmware and app features, customers can use the app to monitor operating information and access supported settings without relying only on the front display.
Key specifications
| Battery capacity | 230.4Wh (25.6V, 9Ah) |
|---|---|
| Battery chemistry | LiFePO₄ |
| Battery cycle life | 2,500+ cycles to 80% original capacity |
| AC output | 300W total, 1 × 230V/1.3A |
| Inverter type | Pure sine wave |
| Power Lifting | 600W |
| AC input | 270W max. |
| Solar input | 200W max., 12–28V DC, 8.2A |
| Car input | 12V / 24V cigarette-lighter source |
| USB-C | 1 × 100W max. |
| USB-A | 2 × 5V/2.4A, 12W each |
| 12V DC output | 1 × 12V/10A regulated car outlet |
| App / connectivity | BLUETTI App (Bluetooth) |
| Pass-through charging | Yes |
| Weight | Approx. 3.6kg |
| Dimensions | 250 × 156.5 × 174.5mm |
| Warranty | 5 years |
| SKU | P-AC2P-AU-GY-BL-010 |
| PR Solar category | Power Station |
| Brand | BLUETTI |
Who is the BLUETTI AC2P best suited to?
The BLUETTI AC2P is best suited to users who prioritise low weight and straightforward portable power over very large battery capacity. Typical uses include campsite electronics, day-trip power, camera and drone charging, laptop work, communications equipment, lighting and maintaining a small reserve for outages.
For camping, list the devices you expect to use each day and estimate their watt-hours rather than looking only at peak wattage. A portable fridge, laptop, lighting and phone charging can have very different daily energy requirements even when their instantaneous power draw is modest. Comparing that daily total with the 230.4Wh battery capacity provides a more useful estimate of whether the AC2P is the right size.
For backup use, decide which devices genuinely need power during an outage. The AC2P can be useful for low-to-moderate power essentials, but customers needing extended refrigerator operation, heavy appliances or whole-home backup should consider a higher-capacity BLUETTI model or a dedicated home battery system.
Solar sizing for BLUETTI AC2P
The AC2P’s 200W maximum solar input gives it meaningful off-grid charging capability for its battery size. Solar harvest changes with panel angle, cloud, shade, temperature and time of day, so a panel labelled 200W will not produce exactly 200W continuously in normal outdoor conditions.
More importantly, panel electrical limits must be compatible with the AC2P. The published solar input range is 12–28V DC with an 8.2A current limit. Do not select a panel or series-connected array purely by wattage; confirm voltage and current specifications before connection. If you are unsure which BLUETTI panel or solar configuration suits the unit, PR Solar can help check compatibility before purchase.
Battery care and storage
LiFePO₄ chemistry is well suited to regular cycling, and BLUETTI currently publishes a cycle-life specification of 2,500+ cycles to 80% original capacity for the AC2P. For long-term storage, follow BLUETTI’s current guidance, keep the unit dry and ventilated, and avoid leaving it completely discharged for extended periods.
If the AC2P is stored primarily for emergency backup, check its state of charge periodically so it is ready when needed and is not left at an unsuitable state of charge for months at a time.
Frequently asked questions about BLUETTI AC2P
How much battery capacity does the BLUETTI AC2P have?
The BLUETTI AC2P Portable Power Station has a published capacity of 230.4Wh. Actual runtime depends on the connected load and normal conversion losses.
What is the continuous AC output?
The Australian AC2P provides 300W total continuous AC output through one 230V AC outlet. Power Lifting capability is published at up to 600W for supported resistive loads and should not be treated as the continuous rating for every device.
Can the BLUETTI AC2P charge from solar?
Yes. It accepts up to 200W solar input within the published 12–28V DC and 8.2A limits. Solar panel electrical specifications must stay within those limits.
How fast can the AC2P charge from mains power?
The maximum published AC input is 270W. BLUETTI lists approximately 70 minutes for a full fast AC charge under specified conditions.
Does the AC2P have USB-C?
Yes. It includes one USB-C output rated up to 100W, plus two USB-A outputs.
How heavy is the BLUETTI AC2P?
The unit weighs approximately 3.6kg and measures about 250 × 156.5 × 174.5mm.
What warranty does the BLUETTI AC2P have?
BLUETTI Australia lists a 5-year warranty for the AC2P. Warranty eligibility and conditions are governed by the manufacturer’s current Australian warranty terms.
Manufacturer information and PR Solar support
For current manufacturer specifications, compatibility information, manuals and firmware details, refer to the official BLUETTI Australia AC2P product page.
For help selecting a portable power station, compatible solar panel or charging accessory, contact PR Solar.
Specifications are based on current BLUETTI Australia first-party information and may be updated by the manufacturer.
